Sir ,
We are using CSI 5200 lube oil analyzer and we are facing one problem with communication port between equipment and system( Window XP).Here I have attached some screenshots of error message. Communication cables are replaced with new one.But still problem persist.Seek valuable advice from you.
Replies sorted oldest to newest
As I recall, the connection is done through COM1 or COM2. It probably is selectable in the CSI software. Have you checked in Device Manager to see if the port is OK?
Thanks for reply John sir.I checked the device manager and changed the another port (COM 2).But still same condition.
Sir, I am using windows XP, Can I delete the communication Port(COM 1).It is reinstall automatically when I connected the lube oil analyser?
I send Port setting of the communication port.
Current COM 1port setting of the system
Bits per second - 9600
Data of bits - 8
Pairty - none
Stop bits -1
Flow control - none
Its is an ok sir?
