I have a CSI 2120-2 with the Accel/Volts Adapter 628. I am guessing that the Pin-out for the input adapter is the same, but maybe not.

On my adapter holding with pins facing outward and short row on top:

For Voltage:
Chan-A+ is pin-3 from Left and A- is pin-4 from Left -- top row
Chan-B+ is pin-5 from Right and B- is pin-4 from Left -- top row

For Accelerometer (ICP-type):
Chan-A+ is pin-5 from Left and A- is pin-4 from Left -- top row
Chan-B+ is pin-5 from Right and B- is pin-4 from Left -- top row

Note B-channel Voltage and Accelerometer are same pin, and both channel share same negative (-) pin, and allpins are on top row.

Good Luck,

Walt

 

 

Add Reply

Post
×
×
×
×