Does anybody have any experience using the Rockwell Dynamix 1444 modules and E-Monitor for in-situ condition monitoring? I'd like some feedback, good and bad as we are looking for a good system that will work with our existing infrastructure.
I'm interested in feedback on this as well. I used the XM modules back in the day but not the 1444 modules. I have been reading on it. Requires upgrade to Emonitor 4.0 but also ties into PI for an overall data historian via OPC and programming in done in Logix so instrumentation do not need to learn a new "language" if you are already using Allen Bradley (which you must be as these tie into the AB PLC). You can force an upload and view high resolution spectral info at any time. I would be very interested to see what others have to say as it looks like a no brainer to extend emonitor to online.