Work Execution ManagementPosts About All Other CMMS/EAM Software
MaintenanceForums
Sorted by last update
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
Here my 10 cents I like to keep it simple, but unique for no mistakes. simple to be understood for any one in the floor to properly fill up a work request and unique to avoid acidente where the tech shutdown and repair the wrong blue weld machine on the wrong corner ou kill someone. I use alphanumeric system (2 letters and 4 number) where the 1st letter is the main function of the machine. example W =weld 2nd is the type (Tig, resistance, spot, mig etc) and the numbers will be last 3 digits... [ more ]
This is just to share few thoughts regarding the equipment numbering system. The idea behind this numbering method is easy identification of equipment and location. The method is as follows Equipment number constitute of different parts. Each parts represents letters or numbers which can identifying the equipment as part of a system . Each part are described below This is the 1st part which is to be mentioned only on title bar of drawing (for instruments) 1) Site 2) Plant 3) System 4) Sub... [ more ]
i am looking for fault codes and equipment codes , for implementing cmms . we have MP-2 software , I will appriciate if any body can send me lists of equipment codes and general fault codes for medium size industry and give me some hints for implementing CMMS ajit [ more ]
See all 37 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Hi Danny, If you haven't yet found what your looking for I'd like to mention Facility One in Louisville, Kentucky. They've been around for a long time, a lot of former electricians and mechanical guys work there and they have a really impressive work order and asset management solution. The price, though not free is very competitive and they offer benefits that other CMMS's just can't. Full disclosure, I work there but I'm on the creative side not account management. Anyway, feel free to... [ more ]
Most modern CMMS systems can cope with your requirements. Try QRmaint.com or maxpanda.com [ more ]
Few points to consider.. 1. Reasonable price point versus functionality 2. Identify your needs first with what the software can/cannot do, a trial version may help give you a rough idea of what it might be like. 3. Is the software intuitive to use, user friendly, consider - simple but efficient, or -complex with a whole of functionality..wouldn't want your maintenance guys to spend more time creating a Work Order than doing the actual job. 4. Basic CMMS functionality should include... [ more ]
See all 13 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
CMMS does not have to be expensive and difficult to use. If you do not implement it in a large factory, where everything is connected to the SCADA system and has sensors, that is, the majority of modern saas systems will cope with the requirements. Try QRmaint.com, maxpanda.com or even comma cmms [ more ]
Few points to consider.. 1. Reasonable price point versus functionality 2. Identify your needs first with what the software can/cannot do, a trial version may help give you a rough idea of what it might be like. 3. Is the software intuitive to use, user friendly, consider - simple but efficient, or -complex with a whole of functionality..wouldn't want your maintenance guys to spend more time creating a Work Order than doing the actual job. 4. Basic CMMS functionality should include... [ more ]
Try yalemaeam.com [ more ]
See all 25 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Few points to consider.. 1. Reasonable price point versus functionality 2. Identify your needs first with what the software can/cannot do, a trial version may help give you a rough idea of what it might be like. 3. Is the software intuitive to use, user friendly, consider - simple but efficient, or -complex with a whole of functionality..wouldn't want your maintenance guys to spend more time creating a Work Order than doing the actual job. 4. Basic CMMS functionality should include... [ more ]
Hi Francisco, My recommendation would be - Before looking at software options, investigate and outline your business, technical and functional requirements. Fit the software options (in-house or new) into your requirements, rather than fitting your requirements within the current or new software. In theory, the business deliverable of CMMS software should be adding atleast 10% value to your existing assets, so if your assets are worth $10 Million, then the value from CMMS should be $1... [ more ]
Are you looking for a Commercial off the Shelf solution (COTS) or to improve upon the existing in house development? Your considerations should extend to licensing, support, security, development road maps, data migration, integration with other tools, training, the cost of support and enhancements in the future. Will the existing hardware meet the minimum requirements, are there any interfaces e.g. plant for monitoring, scanners/readers for i/o activities. [ more ]
See all 7 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Excellent! [ more ]
Good luck with your CMMS efforts Jim. One thing I'd like to make you aware of based on my experience, Problem, Cause, Remedy Codes are notoriously inaccurate due to being subjectively applied based on technician experience/situational variances and generalized because too many codes are extremely cumbersome and too few are broad-based. I treat them as another data point, but not the entire story. [ more ]
You Guys Nailed! I really appreciate the help. I have had my eye on this issue for some time now but with IT as the big brother they just dont know what the program is capable of. I am constantly being told to wait and better not do that. I understand protocols but its more like do it the old way that never worked. It was just pulling teeth to let me start using action code. Some do not understand metric to prove a need and then some know all to well that it means money too. Bottom line ,... [ more ]
See all 12 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
1) no required unless your employer or customer requires it. if it is out of calibration then everyone suffers the consequences 2) you can test the vibration sensor with portable vibration shaker that delivers and exact amount of energy at a specific frequency. http://www.jmtestequipmentrent...t.asp?ProductID=3584 Sensor info: http://www.modalshop.com/calib...libration-FAQ?ID=326 http://www.modalshop.com/Field...ion-Analyzer?ID=1117 http://www.tezzco.com/vibratio..._repair_services.htm 3)... [ more ]
See 1 reply...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
Note: The original dates (2014) of the first post and the 2 yr span to the last reply!. In reading the reply in 2016, the take-away is that the poster was using an older CMMS version as he said. The newer MAPCON product is what the original poster is using so, as the author mentioned himself, not really a fair comparison. Also, just for the record and sake of accuracy, the happy ending to this original post is that they're a success in their use of MAPCON and run it every day. [ more ]
Yes, i have ben using it for about 2, i have used maximo,SAP, Avantis,megamation etc, and to be honest, it is about how the setup is done, most iterfaces are about the same, there are a few weird things about mapcon, things like searching for parts, equipment etc, there does not seem to be any way to use wildcards, so when you search if you dont have the spelling correct it comes back with nothing, example being, looking for equip # AT2110, if you search AT 2110 it will find nothing, this is... [ more ]
Just CMMS. [ more ]
See all 6 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
SS-CMMS is the best bang for the buck, by a wide margin. It is full featured, but built by a maintenance professional for other professionals, not bean counters. Easy to learn and use. Only $48.00 a year and the best customer service on the planet. Try out the free trial and play with it, costs nothing, no CC info... SS-CMMS.com [ more ]
Have you found a new CMMS yet? I work for MAPCON and I would be happy to answer any of your questions. [ more ]
TensileTest I have the perfect easy to use software for your company - proactivetoolbox http://proactivetoolbox.com/ You go on to website and download the free trial. I know you will like it Mark [ more ]
See all 5 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Take a look at SS-CMMS.com. It's super easy to use, and very affordable. It's actually quite powerful, but you only use what you need and there are almost no mandatory form items. It's only $48 a year... [ more ]
Hi Jack, There are a number of options available in the market Loc8.com , essets and many more. Loc8.com starts at approx $50 per user per month. You can shortlist and compare different asset management software options . You can also potentially use Trello . The basic version which could suit you is free. Good Luck [ more ]
Try the Guru CMMS from Cedesta Systems. It's very inexpensive, but has a powerful scheduler to manage all your activities. [ more ]
See all 13 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Hi, I would recommend to start with your requirements - all three of them, business requirements, user or functional requirements and technical requirements. Once you have a good handle on the requirements, try and quantify the deliverable of your Enterprise Asset Management Software. You should try and get a statement like; our chosen software should help us deliver value of $ 3 Million across the next 3 years. This is just an example, the value and the timeline will vary as per your... [ more ]
It's up to you to fully use all the functionalities available for effective and efficient Maintenance Management and Materials Management. [ more ]
Hi Ally, Google "CMMS Best Practices Study" and download the PDF. It is an excellent source of who is using what EAM/ERP system and gives some insight on their satisfaction. [ more ]
See all 3 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
actually i want a software that can store all the condition monitoring data in one source, like lube oil analysis, vibration, thermal imaging etc.. the analysis will be certainly done by the original equipment. thank you so much for your kind assist. [ more ]
It would be much easier to select a new program that can handle different technologies than to find one that can talk to existing systems from different vendors. I do not have a specific recommendation for a company or model but I suggest to consider the reliability and effectiveness of running different systems over the convenience to have all the inputs in the single depository. In many cases, at least in my environment, one technology will be a main tool for the condition monitoring and... [ more ]
Dear Mr. Ali, i am starting from scratch actually, what i need is a software that i can store data from different sources such as thermal imaging, vibration and other CM activities. thank you so much for your reply and your kind interest. Adnan. [ more ]
See all 5 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
I don't wish to hijack this thread but Bryan's comment has lead me think about .. yes, for an audit to select a package what are the things to look at? Or may I turn this round, would are the things I should ask from the software? Or rather...from your experiences what should be the strong points for a CMMS? [ more ]
I have done quite a number of audits of both the CMMS data build quality and CMMS use I dont use a scoring systems but have done so in other types of audits I have carried out, but its the comments from the team involved that is most useful. CMMS Data Build, you need to look at the process for building the data ie guides, training, guides quality checks, then the quality of the data itself uploaded to the system, e,g. codes, short descriptions etc for assets, spares, job plans etc etc For... [ more ]
Hi Bryan The audit is of the CMMS program itself to determine its reliability and effectiveness. 1.Specify where you are now, where you should be, and how to get there. 2.Detect the differences between what should be happening (management’s expectations) and what is actually happening (user feedback). 3.Expose hidden windows of opportunity (bottlenecks, duplication of effort, black holes, etc.) within current processes. I'm looking for some measuring tools, perhaps excel files to follow to... [ more ]
See all 4 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
Thanks Richard, I appreciate it very much. It's a labor of love for me really, having been in maintenance for over 35 years now. SS-CMMS is there for anyone who wishes to use it. Rob [ more ]
Hi Rob, I think you are good to post that here. I also think that as a community the forum likes people to be up front about their relationship to a product they are offering, recommending, whatever. Stating your position up front can do a lot for credibility. You seem to be being up-front about it, not everyone always is. Cheers, Richard. [ more ]
Yes, it is. I started it 3 years ago for personal use (lack of good cheap CMMS) and opened it up to the public 2 years ago. I make no money whatsoever on the site, just a gift to all my brothers in the maintenance field. If I am not allowed to post about my site I apologize. But I can't afford to advertise so try to let the people that can benefit from it know when the opportunity arises. I can take the post down if you require it. [ more ]
See all 4 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Nick, I promote http://www.maxpanda.net for all small business clients. At $29 you may find it has everything you need and more. [ more ]
Try FastMaint CMMS. Their trial software is fully functional. http://www.smglobal.com/ [ more ]
I’m probably a little late for the post and would like to apologies in advance for putting my own company here. However, a quick look at Tabs FM may offer some answers. Tabs is modular solution which helps keeps the costs down. Its flexible design ensure you can bolt-on additional features to suit future demands. In addition to this, it might be worth checking out our blog on implementing a new software system. Hopefully, you can pick up a few tips from here. [ more ]
See all 18 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
While paper based and excel data sheets are sufficient the benefits of having a cmms/eaf/cafm software may be the next step your seeking. We know papers go missing. Work declines. Having a low cost cmms on hand to plan your month and receive notification from around the workplace can only benefit your organization. A change from paper based to a digital environment. Minimize energy consumption by eliminating paper waste, internal technology infrastructure and carbon emissions through... [ more ]
Quote: 18 techs split half between operators and maintenance techs. What is the exact meaning? Are you guys operators cum maintenance or are you working based on operator-based maintenance? Do you have real operators only? [ more ]
Ok, that;s about over 1000 WO per month or over 30 WO per day. Are these all corrective works or inclusive of preventive works? Or 30 Wo/18 techs ~~ 3.33 WP per tech per day. What facility is it? [ more ]
See all 10 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
Try FastMaint CMMS. Their trial software is fully functional. http://www.smglobal.com/ [ more ]
Believe in what Eugene said: Before thinking about any software write down what is required for your business. Then ask some software providers whether they can implement what you need. And have a close look on support on the market. Who can and will support you and the software when you use it ? Will the software still be supported in some years ? [ more ]
You can also try out FacilitiesDesk. FacilitiesDesk is a web-based Maintenance and Facilities Management Software with asset management capabilities. To know more : http://www.facilitiesdesk.com Demo : http://demo.facilitiesdesk.com Download : http://manageengine.adventnet.com/products/facilities-desk/download.html Anand For FacilitiesDesk Team [ more ]
See all 7 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
Yeah i'd consider a SaaS provider nowadays if you haven't already found one by now. [ more ]
Perhaps this facility maintenance software ? [ more ]
A cheeky look at www.tabsfm.com could help you [ more ]
See all 15 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Ok, doesn't SAP give you options to upgrade to next versions? [ more ]
Well Josh, I understand what you are trying to get at. I do not necessarily have a problem with Users. However, because we are using an older version of SAP, which is no longer supported by SAP in terms of maintenance; management feels that we need to change to another solution. [ more ]
Again, what are the problems with your existing CMMS software? ideintifying these problems will help you to solve users' rpoblems and meet users' requirements. [ more ]
See all 7 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
RobW, what are the useful pointers of this CAFM? I tried to read the writeup but it is quite long-winded one. [ more ]
We recently put together an article on implementing CAFM, whilst this is CMMS their maybe some useful pointers in the article. I invite you to take a look. http://www.tabsfm.com/information/implementing-CAFM/ Regards Rob http://www.tabsfm.com [ more ]
MM I would improve on whatever your existing CMMS software, provided this LORDIG is a CMMS software, not a condition monitoring software for lifting systems like vibration monitoring software for rotating equipment. [ more ]
See all 11 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
We are in the final steps of connecting SAP to our RBMView. We also installed the APM package and have it connected to Delta V. The APM package looks pretty good and is getting good reviews internally. [ more ]
www.tf7.com Web based program that will accept pretty much any kind of file to be attached. If you can get what you want on a computer screen you can put it in this software. Vibration, Infrared, Oil, UT, ET, MCA, UE leak doc, xls, pdf, dwg, ppt, etc...all can be stored in this software, reasonable pricing, linkable to some CMMS software programs. Forest Purdue is the president and he can answer your questions. Dave [ more ]
anyone familar when the new 64 bits release is coming out v5.42?? [ more ]
See all 5 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
Hi JS, You might already be a long way in the decision process of selecting an EAM solution. i would discourage attempting to develop an environment in AX for the maintenance section of your solution. Mircosoft partners up with severl best of breed suppliers that seemlessly integrate with the AX environment. I have attached a case history from Microsoft. I hope it is still usefull to you. I have attached a case study from microsoft integrating with a [ more ]
Hi JS, There is an extended application to complete your Ax into CMMS. Check Isoft technologies. this may help your requirement. rgds [ more ]
Hi, AX has not really a CMMS module... and it's not a bad thing. I explain. You probably notice from SAP maintenance module, that these financial systems are doing maintenance because they need to do it to have a "complete ERP product"... but in fact these maintenance modules are build like financial system. Now (in 2010), you have the choic among good "best of breed" CMMS to complete your AX erp system. That's up to you now to find the right one, and i'm pretty sure if you do a good search... [ more ]
See all 4 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
At least once, you should go through the user manual of the software. I have read it and am confident you need not turn to any body for help regarding its use. I have got he answers but I want you to explore. Irshad [ more ]
Try posting thuis question in the Vibration section of the Forum: http://maintenanceforums.com/e...s/a/frm/f/3751089011 Walt [ more ]
See all 2 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Hi Pen. John, Were you able to find the information you had requested for your CMMS evaluation? [ more ]
Thanks Josh, thats a good point. Regarding the number of user license, we are looking 15 to 20 license initially. I can get the complete info starting from product download to pricing of FacilitiesDesk from their website but not much user feedback in any of the other maintenance forums. For MC and CWorks can get user discussions, so am looking for few user suggestions. Any MC/CWorks/FacilitiesDesk user can give some tips [ more ]
So the CMMS is for building miantenance. I suggest to check the origin of each CMMS mentioned i.e. is the CMMS originally developed for building maintenance? If yes, it may contain all the necessary functionalities for building maintenance. [ more ]
See all 10 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
I know I am way too late for this discuussion but I am on an eAM implementation and recently thought of this again myself. I have analyzed maintenance data for many years. I know the theory and expected result for use of the multiple notifications. I have seen people use this feature. I have never seen this feature provide enough significant information to decision makers to justify the resources that are used. It is a bit onerous to manage the work request / notification attachment process. [ more ]
Multiple locations can be listed in the Object List button. However, if the work is substantial, it is better to create each notif for each location for facilitating subsequent analysis. [ more ]
We are in fact implementing SAP as the new CMMS. The notifications are pretty much entries made by parties outside of the maintenance group for defects that have been found. Our engineering group performs periodic inspections in the course of which they identify repair needs. These are usually bundled by repair type however each repair type can have multiple locations. [ more ]
See all 6 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
I agree, many CMMS softwares came up with so many features. some are not even applicable and some feature you want are not yet included. Customization is a good thing. PS. Visit my blog: http://cmmssoftwareprogramreview.blogspot.com/ Thank you [ more ]
Well that turned into a waste of time the corp. wont allow a outside add in on the internal net... so without an onsite server. My program cannot be used by other computers as my Dell simply is old and outdated. So good bye maintenance assistant. [ more ]
They know absolutly nothing about it. I honestly am surprised at thier effectiveness with the lumbering excel system. These are short sighted persons and most are late into baby boom era. They are great people who mean well but have hired someone smarter then them and wont believe it was possible. [ more ]
See all 9 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
The demo last for thirty days. I can talk to the man that makes decisions for Performance Plus and find out more. I'm sure I can convince him to allow you to use the program for a longer trial providing you are actually entering the data and look like you eventually would like to purchase. If you think that is a fair deal, email me at blmusmc@gmail.com and I will get you set up with what you need. [ more ]
B L hey the perf.+ demo. How long till demo expires? I am using the joke of a maint system built by a past super on Excel. What im trying to do is get a real system up with all my criteria in it and running for 3 months to show and tell to corporate penny pinchers. The addition has so much potential to cut paperwork and forms from the current managerial and supervisory level personnell They would buy! We utilize Excel, Industrious, Chronos, outlook, and access. I was really thinking people... [ more ]
John, my email is blmusmc@gmail.com. Please email me and I'll answer any of your questions. You can start to look at Performance Plus by requesting a demo account. I'm sure it will take care of what you need it to. Performance Plus can also import your data from existing programs if you need it to. [ more ]
See all 26 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Thank you for your time Josh. I was actually looking for someone who would log into the program and test it compared to an asset management program they are familiar with. I would like to know what a non-bias third pary person has to say. If anyone is interested, the feedback would go to help make Performance Plus better. Thank you in advance. [ more ]
I already gave my comments. [ more ]
Have you taken a look at the program yet? I reccomend requesting a demo account in order to look at the program then give feedback. [ more ]
See all 12 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Then get the calibration reqt's from the user or discipline like Instrument section. [ more ]
What I'm looking for is triggering a PM that would record calibration data on a machine. I am very familiar with CMMS's but I don't know a lot about calibration requirements. Example: What gets recorded (units of measurement)? What are trigger requirements? Anything else valuable to check on calibration like which instrument is doing the calibration? I need to know how to implement calibration requirements into our existing PM structure. [ more ]
Wht types of equipment or instruments do you need to calibrate? I think if you need to trigger calibration dates in CMMS< you hvae to make PM schedule in it. For tracking whether calibration data is right or wrong, this is done outside cmms. [ more ]
See all 3 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
Is vibration analysis only applicable in Heavy Duty equipment, such as turbine or with high powered motor. I am thinking of using vibration analysis on our equipment. Anyone use same vibration analysis or same application for a Test Semiconductor Company? [ more ]
Good deal Dave. I've been in touch with them. Hopefully they can use my raw data and input this into their software to see if they can give me a trial run...We'll see... SKF uses an export file extension of .mab If so then it's just a matter of cost, and getting the approval. The term I was looking for obviously now was, Operational Deflection Software, ODS [ more ]
There are several vendors Rodl. ME Scope comes to my mind first. It is called Operational Deflection Shape (ODS). You can google it and find several. Dave [ more ]
See all 3 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
I would also be interested to hear from all in our community about these suggestions. Don't keep it a secret. [ more ]
We thank all members of the community who emailed us with excellent suggestions, most of which are now reflected in our just released version 7.0. For members of the community who use our FREE version, you will be happy to note that we have now included our Planning Calender in the FREE version. Please continue to give us your feedback as this is the most effective way for us to tailor our product to your needs. [ more ]
Hi Mr. Weir: Sorry but at this time, you are missing my point by saying “You are really not helping your cause by allowing your wares to be associated with discussions like this.” This conversation is not about my product, is about those prospective customers having the choice to choose what they think is a good fit for them. It is also about, small companies trying to do business and you slapping them on the face without even let them try. I do not know why you are so upset about when if... [ more ]
See all 15 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
Work Execution ManagementPosts About All Other CMMS/EAM Software
I'm not sure cause I'm just starting to look at packages but it seems on the high end of what I want to spend. The price starts at $2000 and goes to $4000 depending on the amount of entities you have 50,100 and unlimited. I have more than 100 entities so I would be at the $4000 mark. I like the fact that their located in Canada and the sales rep actually was trying to convince me that I should have no problems setting it up on my own. They do have training and/or setup services if someone... [ more ]
I had a look at PMXpert about four or five years ago but I cannot remember any details. Is it low cost? [ more ]
See all 2 replies...
Work Execution ManagementPosts About All Other CMMS/EAM Software
You should also take a look at eMESA. here's the link... www.dts-global.com Dave [ more ]
Well, what I've found in my research is that there appear to be two programs that have this kind of add-on software, one being a product from Meridium that is also an SAP partner, and another called APMOptimizer from BQR.com. But if you are starting and EAM from scratch, Hansen.com's product appears to be tailor made for municipal infrastructure. Too bad we already have SAP. [ more ]
The previous poster has made three "contributions" to these forums all of which were to recommend his own company's product with no reason given as to why he is making this recommendation. This is a maintenance discussion forum, not one for free advertising. MOwens, you offer a web based solution, the OP did not ask for a web based solution. Can you therefore tell us why you think it is suitable and how it would meet his needs? [ more ]
See all 4 replies...
Join Us!
The Association for Asset Management Professionals (AMP) is dedicated to making the world work for everyone, with no one left behind.
The mission is to provide a path to a safe, sustainable, successful workplace and world through reliability and asset management.
AMP is a Florida based 501 (C3) not-for-profit organization that delivers
- Professional Certification (CRL and CMM)
- Online Community of Knowledge
- Competency Based Learning (CBL)
- virtual Special Interest Groups (vSIG)
This web site is FREE to use for registered members and has been called the LinkedIn or Facebook for Reliability Leaders and Asset Managers. The Community of Knowledge is simply fantastic.
The Association of Asset Management Professionals (AMP) is licensed to develop competency based frameworks using Uptime Elements Reliability Framework and Asset Management System and its related Frameworks.
You are also invited to join the Association of Asset Management Professionals
LinkedIn Discussion Group with 53.000+ members
https://www.linkedin.com/groups/1636387
LinkedIn Company Page as well
https://www.linkedin.com/company/association-of-asset-management-professionals
Already a member? Sign In