Skip to main content

MaintenanceForums

Sorted by last update

Work Execution ManagementPosts About Infor CMMS
MP2 certification
RM Registered Member
Registered Member Datastream at one time gave MP2 versions 5 and 6 certification tests. I am being told by their reps that they no longer do. Does anyone know of any other place that does give certification tests. My situation at work is that 12 maintenance personnel are being rolled into production areas as operators due to maint. cuts. I have maintained the MP2 6.0 for 2 years and never had a reason to be certified. Senority situation. Any help would be appreciated. Thank you Albert Anietie [ more ]
Registered Member Don, Please contact me there may be something we can do. [ more ]
See all 2 replies...
Work Execution ManagementPosts About Infor CMMS
CMMS
RM Registered Member
Registered Member Try this free CMMS http://www.cworkssystems.com/download.html [ more ]
Registered Member Give this one a look. It's geared for water utilities, but it can be used by anyone. CUPSS is a free, easy-to-use, asset management tool for small drinking water and wastewater utilities. CUPSS provides a simple, comprehensive approach based on EPA's highly successful Simple Tools for Effective Performance (STEP) Guide series. Use CUPSS to help you develop: A record of your assets, A schedule of required tasks, An understanding of your financial situation, and A tailored asset management... [ more ]
Registered Member Try this weblink http://blog.capterra.com/4-top...ms-software-options/ [ more ]
See all 3 replies...
Work Execution ManagementPosts About Infor CMMS
MP2 2000 display issue
RM Registered Member
Registered Member This is an issue with older versions of MP2. Try closing all other MP2 windows. It sounds like your associate is adding Work completion / progress data, try using the Quick Work order update module. Here you enter the Work Order number, rather than scrolling up and down searching. You can enter labor, parts and comments on this screen. A low cost barcode scanner will eliminate the need to enter the WO No. Alternatively in the Work order module use MP2's search function to find the work order... [ more ]
See 1 reply...
Work Execution ManagementPosts About Infor CMMS
REASON FOR FAILURE CODES
RM Registered Member
Registered Member I thought the reason for failure codes is to report and collect data to enable failure analysis. [ more ]
Registered Member I don't think it is necessary to split them if the CMMS can allow updating them once entered before closure of WO or if they are to be entered after Work completion at site i.e. during technical completion in CMMS. Duplicate work order can be avoided by using the same and right tag no. [ more ]
Registered Member https://www.linkedin.com/pulse...-reeve?trk=prof-post [ more ]
See all 32 replies...
Work Execution ManagementPosts About Infor CMMS
Help with Mp2 parts receiving!
RM Registered Member
Registered Member I have updated this solution. You can now print receive labels from MP2 with as few as 2 mouse clicks. No new software is required. If you require bar codes, ask your IT department to install bar code fonts on your MP2 PC. regards, Donal Fleming. flemingtechnical.com 678-777-9015 df@flemingtechnical.com [ more ]
Registered Member I recently developed a solution for this problem. The client requires one label for every part except for large quantities, like the o-rings you mentioned. This solution requires Crystal Reports. After receiving the items, the user switches over to Crystal Reports and prints labels for all items received “recently”, normally in the previous minute. This interval can be changed, in case the user has been interrupted. There is an option to set the maximum number of labels to be printed. You... [ more ]
Registered Member When I receive parts, MP2 automatically fills in the quantity and number of labels. There are times you have to change the quantities, but all the part numbers are there. See attached. There may be something in your purchasing set up that needs to be changed. As for the labels, go into reports, inventory, item labels. Open the receiver labels, and you can modify and change settings there. Hope this helps. [ more ]
See all 8 replies...
Work Execution ManagementPosts About Infor CMMS
Unable to print work orders in MP2 - Win2K Version
RM Registered Member
Registered Member We have the same problem with our MP2/Access 2000 running on windows server 2003. This is while trying to print from the server. Other users can print the work orders just fine from their client installations. Have a difficult time understanding how the server isn't finding a connection to the database. [ more ]
Registered Member Only one person uses it. [ more ]
Registered Member I am sorry how many persons can print work orders in your company because two or several work orders printed may cause confusion? [ more ]
See all 6 replies...
Work Execution ManagementPosts About Infor CMMS
Delete stock location in mp2 6.1 server edition
RM Registered Member
Registered Member mp2 pro 6.1 server edition build 20100122 [ more ]
Registered Member what version of MP2 are you running? [ more ]
Registered Member even as administrator it wont let me delete them, it has warehouse and stock location grayed out as read only fields, when i attempt to delete it says I cant delete a read only field, even with stock as zero [ more ]
See all 4 replies...
Work Execution ManagementPosts About Infor CMMS
Load Sample Database
RM Registered Member
Registered Member Ok, now I see how the problems came. So have to delete the sample data one by one? [ more ]
Registered Member Older version of MP2 used to include a separate training environment. The newer versions on MP2 (SQL) do not include a separate training environment. The training data is appended to your live data with no batch removal tool included. [ more ]
Registered Member isn't there a training region where you can do whatever you want without affecting the actual database? To delete the sample database, ca you not select a number of them and then click delete but can still be seen in there? Or do you really need to delete one by one? [ more ]
See all 4 replies...
Work Execution ManagementPosts About Infor CMMS
Datastream mp2 Access 2000 question
RM Registered Member
Registered Member Would that cause the printer option in the toolbar to be greyed out as well? [ more ]
Registered Member The error is telling you the system is running into a data record that it cannot handle. Rolling back to with a back up as Donal suggested may be the easiest or you will need to troubleshoot your database to find the record(s) causing the issue. [ more ]
Registered Member What built in utils were you referring to? [ more ]
See all 5 replies...
Work Execution ManagementPosts About Infor CMMS
Very old Datastream MP2 (Access version), how to change default data directory??
RM Registered Member
Registered Member Thank you anyway...we don't have a support contract so I'm on my own. I can leave it as is but if I can successfully change it so much the better. I'll try again sometime soon going through the registry again etc.. I also looked to see if anything got placed into a user profile etc. but that yielded no results. Thank you, Tom [ more ]
Registered Member To be honest it looks like your doing everything correctly. I don't think anyone is going to be able to help you without digging into the issue more and probably remoting into your setup. [ more ]
See all 2 replies...
Work Execution ManagementPosts About Infor CMMS
error message when opening MP2 PO module
RM Registered Member
Registered Member You should check the line items on the PO, not just the POHEADER info. If that doesn't work you will most likely need to analyze your database to find the corrupted record. This can be a time consuming process. [ more ]
Registered Member Hi. So I have tried data surgery and dont see anything that could be causing this error. I also cleaned up the default req and I am stilling getting this error and so are all the other users. Anybody have any other suggestions/ideas? Kind regards [ more ]
Registered Member The error is occuring as soon as I hit PO module it will not let me sort, find, print preview or filter when I click on "OK". I don't see the ~ symbol anywhere. Thanks for the info I'll try data surgery. [ more ]
See all 5 replies...
Work Execution ManagementPosts About Infor CMMS
How do you include comments made on a previous PM when generating/printing new pms?
RM Registered Member
Registered Member Dear Terry, This can be achieved by writing a Flex. please feel free to discuss me on ajith.shinde@bwir.com. Thanks & Regards, Ajit Shinde Sr. Consultant www.bwir.com [ more ]
Registered Member Documenting a bearing replacement as part of a PM makes it difficult to track. MP2 does not have a way of automatically referring to a previous work order. A suggestion: Issue a separate work order to inspect the bearing and replace, if necessary. The Scheduled start date can be one month in the future. Set the WO status to Hold. When the scheduled Start date is reached, if the bearing does not warrant replacement, the work order can be updated and rescheduled. Work around methods to achieve... [ more ]
See all 2 replies...
Work Execution ManagementPosts About Infor CMMS
Select the work orders with task that have been assigned to a specific company
RM Registered Member
Registered Member Dear Daniele, It is move advisable to create a User Defined Grid rather than a dataspy.It can be designed to suit your requirements. Please feel free to discuss me on ajith.shinde@bwir.com. Thanks & Regards, Ajit Shinde Sr. Consultant www.bwir.com [ more ]
Registered Member Hello, This query is possible. But you need to write a little code on the Advanced tab of the dataspy. But, I don't really understand what you mean about tasks assigned to companies. If you want to give me a call, I might be able to walk you through the tables / fields you need to query. What version of the software are you running? Forms or EWS? Oracle or SQL Server? Steve 804-337-6464 [ more ]
See all 2 replies...
Work Execution ManagementPosts About Infor CMMS
Create the Flex SQL in Infor EAM EN 8.2
RM Registered Member
Registered Member Dear trongnh, Kindly send me the code, I will check and confirm you. please send me the code on ajith.shinde@bwir.com. Thanks & Regards, Ajit Shinde Sr. Consultant www.bwir.com [ more ]
Registered Member You'd need to post your code in order to troubleshoot this. Or, you can send it to me and I can take a quick look. s_schwabe@msn.com [ more ]
See all 2 replies...
Work Execution ManagementPosts About Infor CMMS
KPI and Balanced Score Card
RM Registered Member
Registered Member Thanks for all.I want contribute for developing my project. Apart from that, you also can ref more resources at: Project management KPIs Best wishes. [ more ]
Guest Dear Sir / Madam, Datastream were promoting, very strongly recently, their product called Performance Management (or something similar) Which was a collection of indicators aimed at asset performance and improvement. I have seen this and personally, find it to be a good representation of some general aspects of asset management. However, as normal, I would suggest that any measurement regime based on monitoring performance will highlight some areas of poor performance. However, in order to... [ more ]
Guest Dear Sir / Madam, Datastream were promoting, very strongly recently, their product called Performance Management (or something similar) Which was a collection of indicators aimed at asset performance and improvement. I have seen this and personally, find it to be a good representation of some general aspects of asset management. However, as normal, I would suggest that any measurement regime based on monitoring performance will highlight some areas of poor performance. However, in order to... [ more ]
See all 4 replies...
Work Execution ManagementPosts About Infor CMMS
Importing CSV File into MP2
RM Registered Member
Registered Member Hi We have recently done this stuff for one of our client, may be i can help if you have any questions email to ashwin.panchal@bwir.com [ more ]
Registered Member There are multiple solutions on the market that do exactly what you are looking for from rugged Windows Mobile devices. [ more ]
Registered Member That's what I feared. Oh well, we're stuck with double entry for now. That's better than the triple entry we had before. [ more ]
See all 4 replies...
Work Execution ManagementPosts About Infor CMMS
Does MP2 work on windows 7?
RM Registered Member
Registered Member Thanks for the info. I installed Virtual PC and run MP2 that way. [ more ]
Registered Member The installer is not compatible with 64 bit windows but the program will run if it is manually installed by copying the install files from another computer and manually setting up the ODBC connection. [ more ]
Registered Member Thank you for the replies. I tried installing MP2 from the CD on a windows 7 pc running 64 bit. I get the attached message. I tried running it in compatibility mode and no go. Any suggestions? Thank you for your time. [ more ]
See all 5 replies...
Work Execution ManagementPosts About Infor CMMS
can't receive items
RM Registered Member
Registered Member Just in case someone else happens upon this issue. Looks like when I archived the records it started the autonumber counter over again(dunno why) And when I archived the previous records, they weren't deleted like they should have been. The 158 error meant that I would have broken the autonumber rules on the issrec table. Went in, took out the old records, and it's working fine again. [ more ]
Registered Member that's what I was worried about. I appreciate your help! [ more ]
Registered Member Did you perform a backup? It sounds like the process of archiving has left the database corrupted. The easiest solution for you would be to just restore the database to before you performed the archive. You could always try using the restore option if you didn't take a backup and restore all of the old archived data then see if it works. [ more ]
See all 7 replies...
Work Execution ManagementPosts About Infor CMMS
MP2 Barcodes
RM Registered Member
Registered Member Crystal Reports is on sale from SAP Americas with a $100 discount - down to $395 per named user license. You can use Crystal Reports to print bar code labels without MP2's bar code module. In addition you can produce maintenance management reports which are a substantial improvement over the canned MP2 reports. To purchase Crystal Reports go to SAP Americas website: http://store.businessobjects.c...&productID=100546100 (note: this link will bring you to SAP's website, I am not connected... [ more ]
Registered Member Donal, Thanks for confirming that you would need to use another program with training to print barcodes without the module in MP2. I also agree that a USB barcode scanner is a much cheaper option if you don't want to go mobile with your barcode solution. I have used these before. http://www.waspbarcode.com/scanners/ [ more ]
Registered Member Jonantan, There are several methods of printing labels: Crystal Reports is preferred. Other ways include Microsoft Access. Excel, Word's Mail Merge are slower, more cumbersome alternatives. The pre-programmed scanner interfaces directly with MP2. Simple plug the scanner into a spare USB port, open MP2 and start scanning. The total cost is comparable with the annual, recurring costs for Infor's solution. Performance is perhaps faster. Regards, Donal df@flemingtechnical.com ... [ more ]
See all 7 replies...
Work Execution ManagementPosts About Infor CMMS
Cannot attach file
RM Registered Member
Registered Member I have a seperate server for MP2 Sql. I have a document folder on that server that I have all of the attachments in. When I reference the attachment, I use the IP of the server and than all are able to see the info. I have 9 seats and the program is on over 100 PCs all networked. Using a mapped drive letter to attach the document did not work as all of the PCs do not have a mappign to the server, just the database. [ more ]
See 1 reply...
Work Execution ManagementPosts About Infor CMMS
Problem with Thrust ball bearing....
RM Registered Member
Registered Member It would be unwise to assume that all thrust bearings have a contact angle of 90-degrees. I did work on a small hydro turbine thrust bearing, and the Demod spectrum showed harmonics of 0.5xSS. Subsequent repairs confirmed my bearing fault diagnosis. There are many situations where different faults can have the same vibration frequencies. One must be able to analyze all data to identify the correct or most likely fault. Walt [ more ]
Registered Member In typical bearing, the cage travels at a speed of FTF with respect to the outer ring, and (1-FTF) with respect to the outer ring. I never stopped to think about it, but it makes sense that FTF = 0.5 order for all 90 degree contact thrust bearings.....because the pitch diameter of both races is the same, so ball must travel the same speed relative to each race.... the only way to do this is if they travel one half revolution (with respect to stationary outer race) per shaft revolution, which... [ more ]
Registered Member Walt is correct. You should post this in the regular vibration forum. http://maintenanceforums.com/e...s/a/frm/f/3751089011 Usually, detection of being faults are not always dependent upon the fundamental, but more on harmonics (even if equal multiplies of running speed) and floor noise around the harmonics. Bearing defects are basically easy to reconize, especially after an analyst develops a pattern reconization skill of analysis. If you think you have a bearing "fault", post the data for... [ more ]
See all 4 replies...
Work Execution ManagementPosts About Infor CMMS
cannot check-out inventory
RM Registered Member
Registered Member Here is the path for MP2 6.1 SQL, Professional: E:\Help\Professional There you will find the following manuals: -Add On -Quick Start -System Administration -User Guide* *I recommend purchasing the Essentials training guide. It's much more helpful than the user guide. [ more ]
Registered Member I’m sorry to hear that everyone who had training is no longer there. Here are some ideas to help with this issue: 1) We offer 2-hour online training sessions and I’m certain that you will feel satisfied with the training, if not relieved, by having someone walk you through the software and sharing MP2 tips and tricks with you. No travel is involved. Training occurs online with a live MP2 expert. 2) We send out MP2 tips of the month and a quarterly newsletter. If you would like to stay in the... [ more ]
Registered Member Dear Ruth, Yes. but its since 3 years ago and before i join this company. those employees who got the training have already resigned. Is that any alternative method to solve this problem? Or could you give me the advance manual/admin guide to solve this kind of problem? [ more ]
See all 4 replies...
Work Execution ManagementPosts About Infor CMMS
Zebra printers
RM Registered Member
Registered Member It's great to hear that you are in the process of getting your inventory identified with a barcode label! An overview on the barcode printer that CMMS Data Group recommends follows: Leading the way in versatile and affordable desktop printing - the thermal transfer (TLP) 2844 bar code printer brings a new level of performance to the Zebra desktop family. This space-saving, user-friendly printer delivers optimal performance in today's on-demand desktop labeling applications. The TLP2844 is... [ more ]
Registered Member I recommend the TLP 2844, I have used it in countless MP2 implementations. It has a variety of sizes for labels but I would say the standard size that most people use is a 2x1, 3x1, or 4x1. You can buy one here if interested. http://www.cmmsdatagroup.com/m...ory-17-Printers.aspx [ more ]
See all 2 replies...
Work Execution ManagementPosts About Infor CMMS
cannot close Work Order
RM Registered Member
Registered Member that mean your system has a some delay time when user change or edit data in the system from workstation. but my situation is the system do not received a command "close work order" from workstation. [ more ]
Registered Member if it's anything like my system, it can take anywhere from 5 seconds to 15 minutes for the server to see the client changes, I haven't the foggiest idea why. [ more ]
See all 2 replies...
Work Execution ManagementPosts About Infor CMMS
problem deleting user
RM Registered Member
Registered Member I'm not sure if I've opened the right database or not, but it's the one with all the other tables I use in it. I open the mp250.mbd in the MP2 data folder, and there's no WOVW table in it. [ more ]
Registered Member Did you try opening the database in Access and looking at the WOVW table? [ more ]
Registered Member That's what gets me, the user is neither attached to any current work orders, or any past work orders. I've also checked the tasks, nothing show up. [ more ]
See all 5 replies...

Join Us!

The Association for Asset Management Professionals (AMP) is dedicated to making the world work for everyone, with no one left behind.

The mission is to provide a path to a safe, sustainable, successful workplace and world through reliability and asset management.

AMP is a Florida based 501 (C3) not-for-profit organization that delivers

  • Professional Certification (CRL and CMM)
  • Online Community of Knowledge
  • Competency Based Learning (CBL)
  • virtual Special Interest Groups (vSIG)


 This web site is FREE to use for registered members and has been called the LinkedIn or Facebook for Reliability Leaders and Asset Managers.  The Community of Knowledge is simply fantastic.

The Association of Asset Management Professionals (AMP) is licensed to develop competency based frameworks using Uptime Elements Reliability Framework and Asset Management System and its related Frameworks.

Uptime Elements Reliability Framework and Asset Management System
Uptime Elements Reliability Framework and Asset Management System

Uptime Elements Digitalization Framework
IoT Knowledge Domain

Vibration Elements
Vibration Analysis and Diagnostic Framework
Lubrication Elements
Asset Lubrication Framework

 You are also invited to join the Association of Asset Management Professionals

LinkedIn Discussion Group with 53.000+ members

https://www.linkedin.com/groups/1636387

LinkedIn Company Page as well
https://www.linkedin.com/company/association-of-asset-management-professionals

Join Now

Already a member? Sign In

Upcoming Events

VIRTUAL CRL EXAM
VIRTUAL CMM EXAM
VIRTUAL CRL EXAM
VIRTUAL CMM EXAM
VIRTUAL CMM EXAM
VIRTUAL CRL EXAM
VIRTUAL CMM EXAM
VIRTUAL CRL EXAM
VIRTUAL CMM EXAM
VIRTUAL CRL EXAM

Complete Calendar

Online Now

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×